Fatshark Operation

Hello again.

Today  changed my reciever in my FatShark Teleporter V3 goggles to a 32channel one.

Had to do a minor operation by cutting and soldering some pins but now it works perfectly :)

First i opened up my goggles by removing 2 screws and the rubber things. Disconnected the old Rx board and removed it.

Here´s the old Rx board.

Another picture of the old board.

Here i cut the old pins in half instead of desoldering them.

New 5.8Ghz 32channel Rx board soldered in place.

And finally a picture of the new Rx board in place before i put it all back together :)